Cut 4 ounces of white melt and pour soap base into 1/2″ cubes. Place the cubes into the Pyrex measuring cup.
Microwave the cubes for 30 seconds. Remove from the microwave and stir. If the soap is not fully melted, microwave for another 10-15. Stir well.
Add 9 drops of cedarwood essential oil, 9 drops of fir needle or pine needle essential oil, 6 drops of rosemary essential oil, and 3 drops of frankincense essential oil. Stir well.
Gently pour the soap base into the mold. Immediately spray the soap with isopropyl alcohol.
Working quickly, cut 12 ounces of clear melt and pour soap base into 1/2″ cubes. Place the cubes into the Pyrex measuring cup.
Microwave the cubes for 30 seconds. Remove from the microwave and stir. Microwave for another 10-15. Stir well.
Microwave for 10-15 seconds more if needed to melt the remaining bits of soap.
Add 3 drops of green liquid soap colorant, 27 drops of cedarwood essential oil, 27 drops of fir needle or pine needle essential oil, 18 drops of rosemary essential oil, and 9 drops of frankincense essential oil.
Stir well to distribute the colorant and the essential oils. Check to be sure a skin has formed on top of the white layer. If not, allow the white base to set up a bit longer.
When you have a skin on the white layer, spray the white layer in the mold with isopropyl alcohol. Gently pour the soap base into the mold. Immediately spray the soap with the isopropyl alcohol again.
Allow the soap to cool for at least 8 hours to ensure it is fully set. Remove the soap by turning the mold upside down and pressing gently on the mold until the soap pops out.
Cut the soap into 4 bars. Wrap each soap in plastic wrap.
Winter Forest Soap https://www.dogwoodsanddandelions.com/winter-forest-soap/